32.8FT 600 LED Strip Light SMD 5050 RGB Tape Lamp Remote / 100 LED String Lights

Description

Welcome to Mingo-tech
32.8FT 600 LED Strip Light Tape Lamp SMD 5050 RGB Remote / 100 LED String Lights
32.8FT 600 LED Strip Feature
100% Brand New and High Quality!
[
16.4ft*2=32.8ft LED Strip Lights
]
LED strip lights are Low voltage (only 12V), Low heat, can be cut (every 3leds)，portable, touchable, with dimmable function. Brightness adjustable, DIY, Multi-color, Comes with adhesive, Convenient and safe to use.
[
Dimmable LED Strips
]
① This RGB Led strip lights kit has 300 premium 5050 SMD LEDs with dimmer and brightness controls.The brightness is adjustable from 10% to 100%. Energy saving!
② 20 Dynamic Modes can be chosen, like Flashing, Breathing, Strobe, Gradient, Cool etc.. You can also DIY your unique color.
[
Strong Sticky Tape
]
With powerful stickiness, you don't worry about the strip falling problem.In addition, it is equipped with 5 wall nails for fixed.
[
Perfect Ambience Light
] Our light strips are made of premium bright 5050 LED lights.IP44 waterproof but It’s controller NOT waterproof and is designed for indoor uses.
[
Free Cutting
]
The LED strip lights have good flexibility, it can bend and fold at will. Led tape lights is cuttable between every 3 leds. You can cut off extra strips to adjust to a proper length.
[
Easy Installation
] Fully equipped accessories, it comes with 2 reel of 16.4ft LED light strip, an AC Power Adapter, a 44-KEY IR remote Control, a controller, a Adhesive Pad, three 4-Pin Connectors and a Instruction Manual, no need for any other expensive devices. Refer to the picture, video and user manual to install.
When you connector you need attention（32.8FT 600LED Strip）
1.Before installing led strip, make sure the surface is clean and flat.
2.Make sure the arrow to arrow, otherwise light strip is not bright.
3.IR remote control must be aligned to the Infrared Receiver of the controller.
4.Power supply input voltage AC85-265V, LED strip light must be used under 12V.
5.Although the led strip is waterproof, the power and controller are not waterproof. It is recommended use for indoor.
6.The light strips can be cutted every 3 LEDs along the marks, but Please make sure the power off first. And if you cut them, you will need one more power adapter to light the rest strip up.
32.8FT 100 LED String Light Feature
100% Brand New and High Quality!
[
Series Connection
]
100 LED with many color choices fairy lights per string. There are end-to-end connection of each string light, which can connect 3 sets(Maximum) in series.
[
8 Lighting Modes
]
Control Box offers up to 8 modes (Combination, in waves, sequential, slogs, chasing/flash, slow fade, twinkle/flash, and steady on)
[
Memory Function
]
Once the mode is selected, the light will work in this mode next time and you don't need to worry about re-set until switched off.
[
Environmental Protection Material
]
PVC material wrapped copper wire, LED string lights save electricity, portable, reusable.
[
IP66 Waterproof
(Only the string light)
]
Suitable for both indoor and outdoor lighting decorations.
Controller: IP44 waterproof.
[
Decorative
] Suitable for garden, yard, bedroom, wedding or wherever you can imaged, they are so bright to create a warm, joyful, romantic sentiment.
Specification （32.8ft 100 LED String Light）
Bulbs: 100LED
Lights Color : Warm White/Cold White/Blue/Colorful
Wire Color : Transparent
Wire Material: Pure Copper
Waterproof Standard (Controller): IP44
Waterproof Standard (Light String): IP66
Wire With Light: 10m/39.4 inch
Space between LEDs: 8.8 cm/3.5 inch
Light Mode: Combination, in wave, sequential, slo glo, chasing/flash, slow fade, twinkle/flash, and steady on. (monitored by ON/OFF button)
10Pcs 4-Pin LED Strip Connector -- Installation Instructions:
1. Open the clip on the side;
2. Slid the 10mm LED light strip inside the clip underneath the two contact prongs;
3. Make sure the side of the strip aligns with the "+ -" polarity;
4. Close the wire clip;
Package included （32.8ft 600LED Strip）
2* 16.4ft LED Light Strip
1* AC Power Adapter
1* 44-KEY IR remote Control
1* Controller
5* Adhesive Pad (Wall nails)
3* 4-Pin Connectors
1* Instruction Manual
If you have any questions, please contact us!