-40%
Cisco CCNA CCNP CCIE Lab 3 Switches C2950 & C2924 2 Routers 2620XM & 2621XM π₯
$ 79.19
- Description
- Size Guide
Description
Local Pick Up AvailableWill be ship thru Fedex Ground or Fedex Home Delivery (No PO BOX)
If you are outside the 48 continental states please contact for rates first.
The shipping you see may be
expensive but keep in mind the box is 50LB or more.
NO RESERVE
2 Routers & 3 Switches + 1 Switch + Power Distribution
I am putting here as much as I know and checked.
I didn't use this equipments for a while and they where working back on time,
now I can't
warranty they will work 100%
but I made some test that I will tell you down here.
They where used as some point for CCNA Cisco training.
What you will be receiving.
Routers
1 - Model # 2621XM
With WIC 1DSU And WIC 2T
Serial # CNMH5R0CRA
1 - Model # 2620XM
With WIC 2T
Serial # CNMH550CRA
Switches
1 - Model # WS-C2950C-24
Serial # FHK0718Z1K7
1 - Model # WS-C2950C-24
Serial # FHK0646W1QX
1 - Model # WS-C2950C-24
Serial # FHK0718Z1K4 (Looks have a problem Completing the boot Read Below)
Extra Switch
Extra Switch I am adding to Make 4 Total Because one of them have problem (Read Below)
1 - Model # WS-C2924-XL-EN
Serial # FAB0502V3ZP
(See last 2 pictures)
Include 1 Power Distribution as in picture
Include All The Power Cords
I turn they and here are the details.
ROUTERS
The Routers turn on and donβt make any beep.
The power light in all of them are solid and some times the activity light brinks (For what I remember they are ready for console connect)
(You may need to reset passwords or some settings)
No further test was made.
SWITCHES
Switch Serial # FHK0718Z1K4Β (This Switch looks like have a problem.
The light SYST blink in orange and the start light is in green
And the mode light do not turn on and do not scroll true the modes.
The fan works but make noise, for this problem I am adding an extra switch
making a total of 4 switches.
The rest of the switches
all the light do this:
Al the switch the boot sequence and leave the SYST light solid in green
and the STAT light light up in solid GREEN
The mode light scroll between the all the 4 model So I think the switches are ok.
No further test was made.
The Routers turn on and donβt make any beep.
The power light in all of them are solid and some times the activity light brinks
Some fans are noisy