Complete CCNA & CCNP V2 Cisco Certified Network Professional Home Lab Kit

Description

All Products are fully tested.
60-Days Replacement Warranty
Please contact us, if you have any question.
1(972)-423-6829
Why do I need to buy Hyper Networks Cisco LAB KITs?
Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam.
Cisco wants to make sure you
really
know your stuff on this exam. CCNA 200-125 V3 exam includes
multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question
types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet question
types. You need to have
a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.
Why do I need a physical router?
You need a physical router because:
*The simulators don't have the ability to give you the
hands on
.
*You need to see what happens when you disconnect a cable.
*You may put a cable in the wrong location or just plain configure the interface incorrectly.
*Dependent on what you do by mistake, you may see either the interface or protocol go down.
*You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.
*You can see what layer is the interface at and what layer is the protocol at.
* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.
*No simulator can simulate that, so real routers and switches are invaluable.
Following units will be upgraded
3x CISCO2610XM 2x Fast Ethernet Series Router 128MB DRAM / 32MBFlash IOS 12.4
UPGRADED TO
3x CISCO1921 2x Gigabit Ethernet Series Router 512 DRAM/ 256MB Flash IOS 15.7
2x WS-C2950-24 24x Fast
Ethernet
LAYER 2 Switch  IOS 12.1
UPGRADED TO
2x WS-C2960-24 24x Fast Ethernet 2x Gigabit Ethernet LAYER 2 Switch  IOS 15.0
1x WS-C3550-24-SMI Layer 3 Switch
UPGRADED TO
1x WS-C3560-24 Layer 3 Switch
Included Items in the lab:
Routers:
3x CISCO1921 2x Gigabit Ethernet Series Router 512 DRAM/ 256MB Flash IOS 15.7
Switches:
2x WS-C2960-24 24x Fast Ethernet  LAYER 2 Switch  IOS 15.0
1x WS-C3560-24  Layer 3 Switch IP 24 Port 10/100
Module Cards:
3x WIC-T1 DSU  Serial Interface Module Card
Cables:
2x Serial Connection Cable for WIC-T1 DSU
1x Console Cable
3x Ethernet Cable
6x Power Cable
Rack:
1x 12Unit Desktop Rack (All devices come with rack brackets for free.)
Bonus DVD:
1x DVD
- SDM Software
- TFTP Software
- Lab examples, questions and answers, manuals, configuration examples
We install latest IOS version on each device.
How Many Routers Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three routers.
One router
will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands.
Two routers
will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections.
Three or more routers
and you will get all the above, more complex topologies and full device elections.
We strongly suggest you buy three router kits.
How Many Switches Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three switches.
One switch
will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs.
Two switches
will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections.
Three or more switches
you will get all the above and full device elections.
We suggest to you buy our three switch lab kits because of having the best learning experience.
Please contact us, if you have any question.
1(972)-423-6829